Small Office in Minami Aoyama / Atelier Write

由专筑网小R编译

Minami Aoyama的办公空间。这是一个小型办公项目，建筑位于日本东京Minami Aoyama一片安静的区域，项目总体规划前期已经确定，建筑师原本需要设计的是总裁用房的室内，但是他认为，每个房间的关系的考量能够提升整体办公空间的品质，因此建筑师重新规划了办公空间的内部，但是前提是成本并不会比原来有太大幅度的增加，那么设计的内容有一间总裁办公室、一个能够兼做工作区域的会议室，以及一间工程师培训研讨室。

Small Office in Minami Aoyama. This is a project for a small office for a tech start-up company located in a quiet area of Minami Aoyama, Tokyo. Since the total plan was decided in the early stage, I was supposed to design the interior of the president’s room, however, I thought that the relationship of each room would improve the quality of the whole office, so I replanned to design the whole interior design of the office. Therefore, it was premised on a proposal that the cost would not increase significantly from the original general specifications. In this situation, it was needed to provide a president’s office, a meeting room that doubles as a place for several employees to work, and a seminar room for engineer training for other companies.









建筑的两扇窗户面向街道，因此建筑师将诸如总裁室、研讨室等小型私人用房放在街道一侧，这样使用者能够通过窗户看到室外，让空间看起来更加宽敞，建筑师应用聚碳酸酯作为装饰材料，在保证采光的同时，又起到了遮挡视线的作用。

As the two windows of the building facing the street, I placed small private rooms such as the president’s room and the seminar room on the street side, so that the outside can be seen through the windows to make the space wider. I chose a polycarbonate hollow sheet as a finishing material for the partition, therefore it provides the gaze shielding function while ensuring daylighting through the whole space.









除此之外，诸如服务设施、通讯设备、研讨会都需要应用电源，而另一方面，房间较为狭小，因此作为IT办公空间中所需的电源设备常常出现，通过外观的设计，整个空间的品质产生了巨大的变化，首先，为了避免太过复杂，基础钢LGS经过切割，直接嵌入电源设备中，这样看起来平整一些，另外，为了统一所有电源设备的安装，LGS连续地应用在墙体上，或者也转换为天花板上的管道，并且电源设备的金属框架直接裸露在外，和LGS的肌理相互协调。

In addition, many electrical outlets were required for the use of servers, communication equipment, seminars, etc. On the other hand, the room is quite small, so the electrical outlets that define the space as an IT office are often seen. By designing their appearance, I thought that the quality of the whole space would change drastically. First, in order to avoid complications, the base steel LGS was cut and the electrical outlets were directly embedded to attach them flat. Furthermore, to unify all the electrical outlets’ installation, LGS is used continuously on the walls or converted to wiring ducts on the ceiling. In addition, The metal frame of the electrical outlets was exposed without a cover plate to harmonize with the texture of LGS.



通过对于背景中的材料的研究，建筑师将它们变得更加积极，其功能与形态表达了使用者的态度，由于疫情的出现，办公空间的规模逐步减小，但是对于真正工作的场所的需求仍然存在，因此建筑师的目标是以最少的措施来提升空间价值。

By working on materials that are usually in the background, I intended to turn them into a positive presence. The functional and stoic appearance is linked to the company’s attitude. While the scale of offices is shrinking due to the COVID-19, the need for real workplaces is being reaffirmed, and I aimed to add value such as individuality and attachment with minimum means.



















建筑设计：Atelier Write
类型：办公室/办公室内
面积：65 m2
时间：2021年
摄影：Yasunori Nakano
制造商：ENDO Lighting Corporation, JIMBO ELECTRIC, Kirii Construction Materials, Oshima Pros
建筑与设计：Takuya Sakamoto / ATELIER WRITE
施工：Mirainoyuuki
电力设计：KEN DENKEN
建筑设计：ATELIER WRITE
城市：Minato City
国家：日本

OFFICES, OFFICES INTERIORS
MINATO CITY, JAPAN
Architects: Atelier Write
Area: 65 m2
Year: 2021
Photographs: Yasunori Nakano
Manufacturers: ENDO Lighting Corporation, JIMBO ELECTRIC, Kirii Construction Materials, Oshima Pros
Architect and Designer: Takuya Sakamoto / ATELIER WRITE
Construction: Mirainoyuuki
Electrical Construction: KEN DENKEN
Architects: ATELIER WRITE
City: Minato City
Country: Japan